RII50520 - Diploma of Civil Construction Design
|
Qualification Description
This qualification reflects the role of individuals working as designers or design paraprofessionals who support professional engineers. They perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment/roles/techniques for themselves and others. They are required to develop site specific work designs to ensure the implementation of the client’s site requirements. They demonstrate the application of a broad range of technical, managerial, coordination and planning skills. Licensing, legislative, regulatory or certification considerations Licensing, legislative and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the qualification. Entry Requirements Nil Packaging Rules |
|
The following table provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Total number of units = 20
20 elective units, of which:
There are prerequisites to imported units listed in this qualification with guidelines for unit selection of prerequisites outlined at the end of this section. Where a unit is imported all prerequisites specified must be complied with and the combined choice of imported elective units and/or their prerequisites must not compromise the AQF alignment of this qualification. Refer to RII Companion Volume Implementation Guide Pathways Section for further guidance.
Unit code Unit title
Group A
BSBINS501 Implement information and knowledge management systems
BSBOPS505 Manage organisational customer service
BSBPEF501 Manage personal and professional development
BSBPMG531 Manage project time
BSBPMG532 Manage project quality
BSBPMG536 Manage project risk
BSBPMG537 Manage project procurement
BSBSTR601 Manage innovation and continuous improvement
BSBTWK502 Manage team effectiveness
Group B
MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
MEM30032A Produce basic engineering drawings
MEM30033A* Use computer-aided design (CAD) to create and display 3-D models
Group C
RIICWD501E Prepare detailed design of foundations
RIICWD502E Prepare detailed design of lighting
RIICWD504E Prepare detailed design of environmental controls
RIICWD505E Prepare detailed design of landscaping
RIICWD506E Prepare detailed design of canals
RIICWD507D Prepare detailed geotechnical design
RIICWD508E Prepare detailed design of rural roads
RIICWD509E Prepare detailed design of urban roads
RIICWD510E Prepare detailed design of busways
RIICWD511E Prepare detailed design of sub-divisions
RIICWD512E Prepare detailed design of motorways and interchanges
RIICWD513E Prepare detailed design of rail civil infrastructure
RIICWD514E Prepare detailed design of dams
RIICWD515E Prepare detailed design of airfield civil works
RIICWD516E Prepare detailed design of bicycle ways
RIICWD517E Prepare detailed design of industrial hardstands
RIICWD518E Prepare detailed design of open car parks
RIICWD519E Prepare detailed design of intermodal facilities civil works
RIICWD520E Prepare detailed design of rigid pavements
RIICWD521E Prepare detailed design of flexible pavements
RIICWD522E Prepare stabilised material mix design
RIICWD523E Prepare asphalt mix design
RIICWD524E Prepare design of spray seal surfacing
RIICWD525E Select pavement surfacing
RIICWD526E Prepare detailed traffic analysis
RIICWD527E Prepare detailed design of traffic signals
RIICWD528E Prepare detailed design of traffic management systems
RIICWD529E Prepare detailed design of underground services
RIICWD530E Prepare detailed design of surface drainage
RIICWD531E Prepare detailed design of subsurface drainage
RIICWD532E Prepare detailed design of tunnels
RIICWD533E Prepare detailed design of civil concrete structures
RIICWD534E Prepare detailed design of civil steel structures
RIICWD535E Prepare detailed design of civil timber structures
RIICWD536E Prepare detailed design of civil masonry, crib and gabion structures
RIICWD537E Prepare detailed design of marine structures civil works
Group D
CPPSIS5032 Capture new spatial data
CPPSIS5035 Obtain and validate spatial data
CPPSIS5036 Integrate spatial datasets
MEM23004A Apply technical mathematics
MEM23007A* Apply calculus to engineering tasks
MEM30005A* Calculate force systems within simple beam structures
MEM30006A* Calculate stresses in simple structures
MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment
MSL924003** Process and interpret data
MSL925004* Analyse data and report results
MSL954004** Obtain representative samples in accordance with sampling plan
MSL974026** Perform tests to determine the properties of construction materials
MSL975031* Supervise sampling, inspections and testing at construction sites
MSL975044* Perform complex tests to measure engineering properties of materials
RIICRC404E Inspect and report on pavement condition
RIILAT402E Provide leadership in the supervision of diverse work teams
RIIMPO402D Apply the principles of earthworks construction
*Note the following prerequisite unit requirements:
20 elective units, of which:
- at least two (2) must be chosen from Group A
- at least two (2) must be chosen from Group B
- at least four (4) must be chosen from Group C
- at least four (4) must be chosen from Group D
- no more than three (3) units may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
There are prerequisites to imported units listed in this qualification with guidelines for unit selection of prerequisites outlined at the end of this section. Where a unit is imported all prerequisites specified must be complied with and the combined choice of imported elective units and/or their prerequisites must not compromise the AQF alignment of this qualification. Refer to RII Companion Volume Implementation Guide Pathways Section for further guidance.
Unit code Unit title
Group A
BSBINS501 Implement information and knowledge management systems
BSBOPS505 Manage organisational customer service
BSBPEF501 Manage personal and professional development
BSBPMG531 Manage project time
BSBPMG532 Manage project quality
BSBPMG536 Manage project risk
BSBPMG537 Manage project procurement
BSBSTR601 Manage innovation and continuous improvement
BSBTWK502 Manage team effectiveness
Group B
MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
MEM30032A Produce basic engineering drawings
MEM30033A* Use computer-aided design (CAD) to create and display 3-D models
Group C
RIICWD501E Prepare detailed design of foundations
RIICWD502E Prepare detailed design of lighting
RIICWD504E Prepare detailed design of environmental controls
RIICWD505E Prepare detailed design of landscaping
RIICWD506E Prepare detailed design of canals
RIICWD507D Prepare detailed geotechnical design
RIICWD508E Prepare detailed design of rural roads
RIICWD509E Prepare detailed design of urban roads
RIICWD510E Prepare detailed design of busways
RIICWD511E Prepare detailed design of sub-divisions
RIICWD512E Prepare detailed design of motorways and interchanges
RIICWD513E Prepare detailed design of rail civil infrastructure
RIICWD514E Prepare detailed design of dams
RIICWD515E Prepare detailed design of airfield civil works
RIICWD516E Prepare detailed design of bicycle ways
RIICWD517E Prepare detailed design of industrial hardstands
RIICWD518E Prepare detailed design of open car parks
RIICWD519E Prepare detailed design of intermodal facilities civil works
RIICWD520E Prepare detailed design of rigid pavements
RIICWD521E Prepare detailed design of flexible pavements
RIICWD522E Prepare stabilised material mix design
RIICWD523E Prepare asphalt mix design
RIICWD524E Prepare design of spray seal surfacing
RIICWD525E Select pavement surfacing
RIICWD526E Prepare detailed traffic analysis
RIICWD527E Prepare detailed design of traffic signals
RIICWD528E Prepare detailed design of traffic management systems
RIICWD529E Prepare detailed design of underground services
RIICWD530E Prepare detailed design of surface drainage
RIICWD531E Prepare detailed design of subsurface drainage
RIICWD532E Prepare detailed design of tunnels
RIICWD533E Prepare detailed design of civil concrete structures
RIICWD534E Prepare detailed design of civil steel structures
RIICWD535E Prepare detailed design of civil timber structures
RIICWD536E Prepare detailed design of civil masonry, crib and gabion structures
RIICWD537E Prepare detailed design of marine structures civil works
Group D
CPPSIS5032 Capture new spatial data
CPPSIS5035 Obtain and validate spatial data
CPPSIS5036 Integrate spatial datasets
MEM23004A Apply technical mathematics
MEM23007A* Apply calculus to engineering tasks
MEM30005A* Calculate force systems within simple beam structures
MEM30006A* Calculate stresses in simple structures
MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment
MSL924003** Process and interpret data
MSL925004* Analyse data and report results
MSL954004** Obtain representative samples in accordance with sampling plan
MSL974026** Perform tests to determine the properties of construction materials
MSL975031* Supervise sampling, inspections and testing at construction sites
MSL975044* Perform complex tests to measure engineering properties of materials
RIICRC404E Inspect and report on pavement condition
RIILAT402E Provide leadership in the supervision of diverse work teams
RIIMPO402D Apply the principles of earthworks construction
*Note the following prerequisite unit requirements:
UNIT IN THIS QUALIFICATION |
PREREQUISITE UNIT(S) |
MEM23007A Apply calculus to engineering tasks |
MEM23004A Apply technical mathematics |
MEM30005A Calculate force systems within simple beam structures |
MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment |
MEM30006A Calculate stresses in simple structures |
MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment |
MEM30033A Use computer-aided design (CAD) to create and display 3-D models |
MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements |
MSL925004 Analyse data and report results |
MSL924003 Process and interpret data |
MSL974026 Perform tests to determine the properties of construction materials |
MSL973022 Conduct laboratory-based acceptance tests for construction materials |
MSL975031 Supervise sampling, inspections and testing at construction sites |
MSL954004 Obtain representative samples in accordance with sampling plan MSL973021 Conduct field-based acceptance tests for construction materials |
MSL975044 Perform complex tests to measure engineering properties of materials |
MSL973022 Conduct laboratory-based acceptance tests for construction materials MSL974026 Perform tests to determine the properties of construction materials |
**This unit is a prerequisite to an MSL unit. Please refer to the prerequisite table above. This unit is only to be selected when the MSL unit is one of the Group D elective units chosen and in the event that the learner does not already hold this prerequisite unit or its equivalent. The selection of this unit must not compromise the AQF alignment of this qualification.
Qualification Mapping Information
Supersedes and is equivalent to RII50515 Diploma of Civil Construction Design.
Qualification Mapping Information
Supersedes and is equivalent to RII50515 Diploma of Civil Construction Design.
RII50520 - Diploma of Civil Construction Design
BSBINS501 - Implement information and knowledge management systems
A$613.12
A$613.12
BSBPEF501 - Manage personal and professional development
A$669.38
A$669.38
RIICWD525E - Select pavement surfacing
A$556.87
A$556.87
RIIMPO402D - Apply the principles of earthworks construction
A$624.37
A$624.37